Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Text excerpt from page 5 (click to view)
ENGLISH
MIXMODE/STEREO
The P4R receiver receives two signals (1/L and 2/R) from the P4T transmitter. The P4R processes these signals in either stereo or MixMode: STEREO
Signal from Audio Source
1/L 2/R
MIXMODE
1/L 2/R
Signal from Audio Source
1/L
1/L + 2/R
MIXED
2/R
P4T transmitters P4R receivers
FIGURE 4
STEREO: In stereo, the signals remain separate so 1/L is heard through the left earphone and 2/R is heard through the right earphone. The balance knob on the receiver adjusts the balance between the left and right earphones. MIXMODE: In MixMode, the signals are �mixed� in relation to one another using the balance knob, blending into one signal. The mixed signal is sent to both the left and right earphones.
USING MIXMODE
Step Two: Using the balance knob, the user blends the two signals until the correct mix is achieved. MIXMODE channel 1 Step Four: The user may continue to adjust the blend using the balance knob throughout the performance.
MIXMODE channel 2
CLOCKWISE
COUNTERCLOCKWISE MID-POINT
Step One: The P4R receives TWO signals from the P4T transmitter.
Step Three: The P4R sends the mixed signal to both earphones.
FIGURE 5 MIXMODE IN APPLICATIONS
MixMode is most useful when two distinct mixes are provided to the P4T transmitter, such as a band mix and a vocal mix. MixMode combines these two signals into one monitor mix and allows you to control this mix during the performance with the P4R receiver. For example, if the band overpowers the vocals in the mix, increase the level of the vocals and decrease the level of the band by simply adjusting the balance knob.