|
Who's Online
There currently are 5898 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
The manual was complete and of great quality. Originally a tri-lingual file, I first received only one language. After a note to owners-manuals.com, I quickly received the remaining languages... Great service, definitely worth it.
;
Thank you for providing this manual and at low cost.
The Philips scope is of excellent quality, longevity and build and had a couple of faults
when it was passed to me. Having the CCT diagrams is a blessing.
I have fixed the problems and also modded the scope to my requirements.
I have built a 24v Li-Ion pack for portable use from old but good laptop batts.
it is working beautifully and I am well pleased. Keep up the good work Guys.
;
manual was very helpful in learning how to propery use my washer. I could not find this manual anywhere else.
;
Awesome quality manual. You really saved my bacon with this one. Was looking for some specific information with regards to my "new" vintage VCR that didn't come with the owners manual. This site is truely a goldmine of available manuals. The quality of the scans are top notch.
Thank-you so much for this awesome manual. If you're looking for this Sony SL-HF400 owners manual, this is the one you NEED to buy. Definitely worth the money.
;
The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
Model ILP-1 User Guide
Output Clipping Level LOAD 150 � 800 � GAIN SWITCH 0 0.0 dBV �13.0 dBV +10 �7.0 dBV �21.0 dBV
Electromagnetic Hum Sensitivity �146 dBV equivalent in 1 millioersted field Electrostatic Hum Pickup �97 dBV typical, measured in 12 kV field Polarity Positive voltage on pin 3 relative to pin 1 of the input connector produces positive voltage on pin 2 relative to pin 3 of the output connector Power Requirement Phantom power: 11 to 52 Vdc at pins 2 and 3 relative to pin 1 Dimensions See Figure 1.
138 mm (5 7/16 IN.)
GENERAL The ILP-1 is a high-clipping level, low-noise preamplifier designed exclusively for use with Shure Models SM90A, SM91A, SM98A, SM102B and SM102W, or for use as a replacement preamplifier for older Models SM90, SM91, and SM98. The ILP-1 connects to balanced microphone inputs providing 11 to 52 Vdc phantom power. Two switches on the ILP-1 allow you to set low-frequency response (flat or rolloff at 12 dB/octave) and gain (0 or +10 dB). The low cut switch minimizes ambient low-frequency noise from sources such as heating or air conditioner fans. The supplied mounting clamps hold the preamplifier in place for permanent installations. Use either one or two clamps depending on location and application. SPECIFICATIONS Frequency Response
Switch Setting Flat Rolloff Gain (dB) 30 Hz to 20 kHz (6 dB/octave rolloff below 30 Hz) 80 Hz to 20 kHz (12 dB/octave rolloff below 80 Hz) Gain (dB) �6.0 (±0.5 dB) +4.0 (+1.0, �1.5 dB)
20 mm (13/16 IN.)
DIMENSIONS FIGURE 1 Weight 170 grams (6.0 ounces) Connectors 3-pin male (TB3M) Input: mini Output: 3-pin (male) XLR-type Switches Two recessed slide switches (low frequency rolloff and 0/+10 gain) Case Steel, matte black enamel finished Environmental Conditions Operating Temperature: �19 to 57° C (�20 to 13° F) Storage Temperature: �29 to 74° C (�20 to 168° F) Relative Humidity: 0 to 95%
Gain (at 1 kHz, no load)
Switch Setting 0 +10
Output Impedance Rated at 150 � (90 � actual) Output Noise (V , grounded, no load)
in
�123 dBV rms typical, A-weighted
E2002, Shure Incorporated 27A8494 (Rev. 1)
Printed in U.S.A.
|
|
|
> |
|