There are currently no product reviews.
It was a complete manual as stated. Very good source for older product manuals. Thanks
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
Perfect for my use.Could have better pictures,but otherwise perfect ;)
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Model 596T User Guide
The internal wiring, circuitry, and switch connections of the 596T are shown in Figure 1.
W6 S1 W1
6 4 3 1
OUT/WHT W2 C4 .001uF
R2 33K R1 300 C1 .1uF
W3 GND/ SHIELD
C2 C3 .001uF 120pF
TRANSISTORIZED DYNAMIC HAND-HELD MICROPHONE
GENERAL The Shure Model 596T is an amplified, dynamic, hand-held microphone designed for rugged and reliable operation in a variety of mobile and fixed-station communications applications. The 596T has an omnidirectional pickup pattern and provides highly intelligible speech communication in police, fire, taxi, bus, utility, forestry, transportation, industrial, radio-telephone, amateur radio and similar applications. In addition to a clear, crisp, natural voice response, the 596T offers extremely low sensitivity to hum pickup. The unit fits naturally and comfortably in the hand and is not affected by heat or humidity. The exclusive ARMO-DURÃ¢ case is immune to oil, grease, fumes, salt spray, sun, rust and corrosionand is outstanding in its ability to withstand mechanical shocks and vibration. Features â€¢ Built-in transistor amplifier (fed by dynamic microphone) â€¢ Frequency response from 300 to 5,000 Hz, tailored for voice communications use â€¢ Low sensitivity to hum pickup â€¢ High-impact ARMO-DURÃ¢ case is lighter and stronger than die-cast metal, comfortable to the touch in hot or cold weather â€¢ Rugged and dependable under all operating conditionsâ€“Long-life Neoprene-jacketed coil cord â€¢ Silver-plated switch contacts for long-term low contact resistance and reliable performance
INTERNAL CONNECTIONS FIGURE 1
The 596T is designed to operate with two-way radio sets with an audio input circuit similar to that shown in Figure 2.
560 FROM MIC OUT/WHT
1K 9.6 VDC
STANDARD TEST CIRCUIT FIGURE 2
SPECIFICATIONS Test Conditions: (unless otherwise specified) Audio output between White and Shield (Ground) PTT switch depressed Measured with High Z DMM Standard test circuit as shown in Figure 2
Type Dynamic (with transistor preamplifier)
Â©2003 Shure Incorporated 27B3023 (Rev. 4)
Printed in U.S.A.